17" Fireplace Grate with Ember Retainer, Wood Stove Grate Rack, Heavy Duty Solid Steel 6-Bars Firewood Holder, Non-Assembly Fire Grate for Indoor Hearth Outdoor Firepit - Matt Black

The WILLOW WEAVE fireplace grate holds well to daily use for many winters, helps with log burning efficiency.The wood log holder captures the embers above the fireplace floor leading to intense heat for BTU generation and ease of “tending the fire”. With this grate you literally just through a log on the fire once you get those embers glowing and each log burns evenly and consistently. The fireplace grate gets the fire up off the floor of fireplace, allows good airflow which means less time stoking the fire and more time enjoying the warmth and crackling. Preferred the flat 'bar' stock on this one as opposed to the square bar stock used for most because logs tend to stay put better. Perfect depth on the 'floor' of the grate allows 5-6 good sized logs. Most important, most other grates listed as 24-in only have four feet whereas this one 17” has six, which means the long bars across the front and back won't sag in the middle over time like most. Tips to Purchase a Solid Perfect Fireplace Grate: a. Measure your firebox correctly, and ensure the grate fits, you may put two smaller grates in a larger firebox. b. When deciding on a grate with large spaces like other suppliers, keep in mind that too much air circulation can be as bad as not enough. If too much vent, not quite enough iron to keep hot embers near the wood... so fires are smoky and required a lot of those little starter bricks to create embers from the kindling and keep the wood hot enough to completely burn. c. Don't hesitate to save awesome bucks on WILLOW WEAVE fireplace grate, it wouldn’t let you down. If you need any assistance, please feel free to send message to us through your order.

• HEAVY DUTY FIREPLACE GRATE WITH EMBER RETAINER: The fireplace grate is made of heavy wrought iron, flat bars are 1 inch wide, 5/16 inch thick. Flat bars hold logs in place better. The fireplace screen/grate has a good weight of 10lbs, it’s durable, thick and well-constructed, easy to clean, just sweep it clean. Ember design makes burning more efficient.
• MEASUREMENTS: 17" W x 10" D x 2" (inner height) / 4"(overall height), two long supporting legs are 6 1/8 inches wide, the fireplace grate holds a pile of wood, and makes fire for a long time.
• SUPERIOR CIRCULATION: The burning wood rack is 2.5" high for easy air circulation and easy heating, this gives enough elevation for the wood to be able to suck a good amount of air from underneath and heat up really good, you can save wood logs, as after wood burning for hours, leave you with a healthy bed of coals on the firebox floor that provide heat in the room but not accelerate the wood burn on logs in the grate.
• STURDY STRUCTURE: 6-legs supporting makes the front and back long bars, not easy to deform or sag, 6 bars with small gaps holds all the big pieces of firewood, and most importantly holds smaller pieces of wood as the logs wittle down, the grate retains the embers to maintain the fire. With this grate you literally just through a log on the fire once you get those embers glowing and each log burns evenly and consistently.
• NO ASSEMBLY & EASY TO USE: The grate is a strong welded piece, no assembly, stylish and functional, suitable for mid-century or modern inside fireplace, wood burning stove, and also practical for patio fireplace, or outdoor campfires.